Causes. This entry is 4 of 15 in the Linux / UNIX NFS File Server . I installed the 7.1 VIB via update manager and all was well. Add services to startup and start them: # systemctl enable rpcbind # systemctl enable nfs-server To verify that portmap is active, type the following command as root: If the portmap service is running, then the nfs service can be started. Here are my reproduce steps: 1. install "Service for Network File System". From Action menu select Storage - New > Datastore. Run this command to stop the SIOC service. Remove any references to your phanton NFS datastore - remove any HDDs that reference it, any ISO files (connected or not), remove VMs from your inventory that are imported from it. Step 06 : verify NFS shared folder. Restart SSL VPN Services. This command is equivalent to issuing the Easy Access Ctrl restart command. NFS Datastore cannot be connected after a restart - VMware Step 01 : install package [NFS] on SLES123. The second one is just to confirm . First log in to the DSM web interface, and configure your NIC adapters in the Control Panel. Thus, we have finished the configuration of our NFS server and may proceed with a client configuration. ESX restart management services | lookingforthis Restart the NFS service on the server. For more information, see this VMware KB article. vSphere version 6.0 and later support vMotion of a VM with an RDM disk in physical compatibility mode. ESXi 6.x -Restart Mgmt Agents via CLI - DavidRing.ie Remove an Inaccesible or stuck NFS datastore from vCenter ... - VMAnalyst On the NFS server, configure an NFS volume and export it to be mounted on the ESXi hosts. You will then see the following output as all the services stop and restart. If I try to log on web console I get 'Connection refused'. Related posts: DNS troubles with Ubuntu Server 12.04 ; How to remove/delete old or unused kernels in Ubuntu ; How to set up SNMP monitoring (snmpd) on Ubuntu 12.04